Juraj Sadel
17daa464ba
Enable ESP32 HIL ( #1977 )
...
* Enable ESP32 HIL
* RMT fixed
* SPI DMA partially works, _pcnt tests not working
* bckup
* finish
* readme and cleanup
* rebase + cleanup
* RMT S2 pin typo + clean forgotten comments
* review comments
* update 10000
* indentation
* replace cfg gate with cfg_if
2024-09-06 08:53:27 +00:00
Dániel Buga
8e6411bd31
Random cleanups in non-checked packages ( #2034 )
...
* Deduplicate feature check macros
* Re-enable rust-analyzer for most of the workspace
* Cargo fix
* Turn off defmt
* Only build xtask
* Clippy pls
* Fix CI
* Fix paths
* Always create doc directory first
* Revert r-a
* Update esp-hal-procmacros/src/lp_core.rs
Co-authored-by: Dominic Fischer <14130965+Dominaezzz@users.noreply.github.com>
---------
Co-authored-by: Dominic Fischer <14130965+Dominaezzz@users.noreply.github.com>
2024-08-30 14:45:54 +00:00
Dániel Buga
99c238d19d
HIL: Don't skip cleanup ( #2024 )
...
* Don't skip cleanup
* Make sure the power is off for a short while
2024-08-28 20:17:10 +00:00
Dániel Buga
d0f98b6c1f
Remove files after test ( #1993 )
2024-08-26 13:50:40 +00:00
Dániel Buga
341db16874
Use uhubctl to disable and enable usb ports ( #1997 )
2024-08-26 13:46:32 +00:00
Dániel Buga
686037be4d
Run HIL tests as part of PR checks ( #1959 )
...
* Run HIL tests as part of PR checks
* Cancel pending HIL runs
* Only run for ready PRs
2024-08-20 11:48:49 +00:00
Dániel Buga
9e87792fb9
Update probe-rs, prebuild xtask for HIL tests ( #1939 )
...
* Update probe-rs
* Differentiate jobs
* Explicitly print that probe-rs's execution failed
* Do not capture stdin/stderr
* Pre-build xtask binary
* Use current_directory
* Print more info when a file can't be read
* Do not erase flash after a failure
* get_time: fail faster
* Make xtask runnable
2024-08-14 15:47:52 +00:00
Sergio Gasquez Arcos
2e8937a90f
Update probe-rs version ( #1914 )
...
* docs: Update probe-rs version
* feat: Simplify probe-rs args
* ci: Update the checkout action to use the fork
2024-08-09 14:11:29 +00:00
Sergio Gasquez Arcos
e58b4d8d89
Check packages with nightly for RISC-V devices ( #1881 )
...
* ci: Check pacakges with nightly
* ci: Remove duplication
* perf: Nightly clippy fixes
* revert: Revert unsafe changes
* ci: Use an action to remove duplication
* ci: Update trigger conditions
* ci: Update S2 serial port
* ci: Rename action
2024-08-07 13:32:48 +00:00
Sergio Gasquez Arcos
0c29c4381c
ci: Use stable channel for RISCV devices ( #1896 )
2024-08-01 17:42:49 +00:00
Scott Mabin
c090191afb
try to fix espflash command not found in HIL CI ( #1848 )
...
* try to fix espflash command not found in HIL CI
* Specify espflash port
---------
Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com>
2024-07-23 17:38:44 +00:00
Sergio Gasquez Arcos
32be53d618
CI Improvements - Part 1 ( #1821 )
...
* ci: Fix condition to erase-flash
See https://docs.github.com/en/actions/learn-github-actions/expressions#example-of-failure-with-conditions
* ci: Remove path-ignore attributes to avoid CI not being triggered
* ci: Build documentation
* ci: Install nightly toolchain
* ci: Deny warnings for building docs
* fix: Documentation warnings
* ci: Remove duplicated step
2024-07-17 15:55:27 +00:00
Sergio Gasquez Arcos
786682c0b2
HIL: Erase flash on failure ( #1748 )
...
* ci: Erase flash on failure
* docs: Add espflash install instructions and fix format
2024-07-04 07:50:40 +00:00
Sergio Gasquez Arcos
e46e80b8c1
Enable C2 HIL ( #1680 )
...
* ci: Enable c2 hil
* docs: Update pins and add C2
* feat: Update C2 probe-rs args
* test: Update pins and disable failing tests
* docs: Update S3 wires
* ci: Enable C2 hil tests
2024-06-26 14:17:40 +00:00
Sergio Gasquez Arcos
a0a02ce2a8
ci: Define GH token ( #1584 )
2024-05-23 13:56:33 +00:00
Sergio Gasquez Arcos
0c95668e7a
ci: Update build-test name to match the required CI jobs ( #1536 )
2024-05-06 06:22:47 +00:00
Sergio Gasquez Arcos
edd03717d2
Enable C3, H2, S2 and S3 HIL ( #1513 )
...
* ci: Enable C3, H2, S2 and S3 HIL tests
* feat: Disable H2
* test: Disable S2
* ci: Update test folder
* docs: Update setup
* revert: Revert S2 changes
* ci: Update hil tests targets
* test: Adapt uart test for S2
* ci: Enable H2 HIL
* feat: Filter unsupported targets for the tests failing
* test: Filter failing targets
* ci: Remove the test folder
* test: Filter S2
* feat: Add supported targets
* feat: Remove TODOs and format code
* docs: Remove outdated comment
* feat: Add run-elfs xtask subcommand
2024-05-02 15:35:23 +00:00
Sergio Gasquez Arcos
20c77891d8
ci: Adapt HIL tests to use RPi ( #1493 )
2024-04-22 14:28:01 +00:00
Sergio Gasquez Arcos
1a5ca65eed
Enable S3 HIL ( #1338 )
...
* feat: Add HIL support for S3
* ci: Add dummy s3 job
* test: Filter interrupt test for Xtensa devices
* ci: Install Xtensa toolchain
2024-04-16 12:09:18 +00:00
Scott Mabin
315b8cc0ff
HIL xtask support ( #1404 )
...
* allow running tests via xtask
* Add run-tests xtask subcommand
* Use xtask in HIL ci
2024-04-05 14:39:20 +00:00
Sergio Gasquez Arcos
baea915935
Add HIL testing ( #1297 )
...
* Create the `hil-test` package
* Add a simple integration test to verify basic GPIO functionality
* WIP
* feat: Update with esp-hal unification
* build: Update dependencies
* feat: Add a simple CI workflow test
* ci: Avoid using a gh-hosted-runner to build
* ci: Remove building bins in gh-hosted-runner
* ci: Remove HIL Gpio CI test
* ci: Test all the available tests
* test: Add spi_full_duplex test
* docs: Add documentation
* test: Add uart test
* style: Remove unused imports
* docs: Update wiring, document H2 VM
* ci: Enable H2 tests
* ci: Add rust-cache action
* docs: Document H2 vm
* test: Add timeout
* ci: Enable ESP32-C3 tests
* feat: Add timeouts
* feat: Add aes test
* ci: Avoid running CI workflow when we change hil-test stuff
* test: Remove warnings
* feat: Address feedback
* feat: Update features names and spi methods
* ci: Remove rust-cache action
* Update HIL to probe-rs#2292 (#1307 )
* feat: Update probe-rs/embedded-test to probe-rs#2292
* feat: Remove lib
* ci: Use a matrix
* ci: Enable ESP32C3
* feat: Add a way to cfg away test for unsuported peripherals
* ci: Update trigger conditions
* feat: Update pins to make it work on s3
* feat: Changes enabling S3
* feat: Remove log feature
* feat: Adapt for rebase
* feat: Remove env
* feat: enable S3
* chore: Remove todo
* build: Pin dependencies
* feat: Add target alias
* docs: Update readme
* fix: Fix traits imports after rebase. Use debug
* build: Remove lto
* feat: Build tests on release mode
---------
Co-authored-by: Jesse Braham <jesse@beta7.io>
2024-03-21 14:28:27 +00:00
