d86300f799
* Update the `GDMA` driver to support the ESP32-H2 * Update the `SPI` driver to support the ESP32-H2 * Add `SPI` examples for ESP32-H2 * Update CHANGELOG * Remove copy-pasted references to ESP32-C6 * Update GPIO pins used in SPI examples, add `qspi_flash` example * Update SPI clock configuration to produce correct clock rate * Correct comment regarding clock source frequency Co-authored-by: Sergio Gasquez Arcos <sergio.gasquez@gmail.com> * H2: Add PLL_48M_CLK src to ClockControl and RawClocks * H2: Use PLL_48M_CLK as SPI clk src * H2: cleanup commented block in SPI driver * H2: update docs comment in embassy_spi example * fmt * Add a new line in embassy_spi example --------- Co-authored-by: Sergio Gasquez Arcos <sergio.gasquez@gmail.com> Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com>
118 lines
4.2 KiB
Markdown
118 lines
4.2 KiB
Markdown
# Changelog
|
|
|
|
All notable changes to this project will be documented in this file.
|
|
|
|
Please note that only changes to the `esp-hal-common` package are tracked in this CHANGELOG.
|
|
|
|
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
|
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
|
|
|
## [Unreleased]
|
|
|
|
### Added
|
|
|
|
- Add bare-bones PSRAM support for ESP32 (#506)
|
|
- Add initial support for the ESP32-H2 (#513)
|
|
- Add bare-bones PSRAM support for ESP32-S3 (#517)
|
|
- Add async support to the I2C driver (#519)
|
|
- Add initial support for RSA in ESP32-H2 (#526)
|
|
- Add initial support for SHA in ESP32-H2 (#527)
|
|
- Add initial support for AES in ESP32-H2 (#528)
|
|
- Add blinky_erased_pins example for ESP32-H2 (#530)
|
|
- Add initial support for I2C in ESP32-H2 (#538)
|
|
- Implement Copy and Eq for EspTwaiError (#540)
|
|
- Add LEDC hardware fade support
|
|
- Added support for multicore async GPIO (#542)
|
|
- Add initial support for MCPWM in ESP32-H2 (#544)
|
|
- Add some miscellaneous examples for the ESP32-H2 (#548)
|
|
- Add initial support for PCNT in ESP32-H2 (#551)
|
|
- Add initial support for RMT in ESP32-H2 (#556)
|
|
- Add a fn to poll DMA transfers
|
|
- Add initial support for LEDC in ESP32-H2 (#560)
|
|
- Add initial support for ASSIST_DEBUG in ESP32-H2 (#566)
|
|
- Add all `SPI` examples for the ESP32-H2 (#549)
|
|
|
|
### Changed
|
|
|
|
- Move core interrupt handling from Flash to RAM for RISC-V chips (ESP32-H2, ESP32-C2, ESP32-C3, ESP32-C6) (#541)
|
|
|
|
### Fixed
|
|
|
|
- DMA is supported for SPI3 on ESP32-S3 (#507)
|
|
- `change_bus_frequency` is now available on `SpiDma` (#529)
|
|
- Fixed a bug where a GPIO interrupt could erroneously fire again causing the next `await` on that pin to instantly return `Poll::Ok` (#537)
|
|
- Set `vecbase` on core 1 (ESP32, ESP32-S3) (#536)
|
|
- ESP32-S3: Move PSRAM related function to RAM (#546)
|
|
- ADC driver will now apply attenuation values to the correct ADC's channels. (#554)
|
|
- Sometimes half-duplex non-DMA SPI reads were reading garbage in non-release mode (#552)
|
|
- ESP32-C3: Fix GPIO5 ADC channel id (#562)
|
|
|
|
### Changed
|
|
|
|
- Improve examples documentation (#533)
|
|
|
|
### Breaking
|
|
|
|
- Significantly simplified user-facing GPIO pin types. (#553)
|
|
|
|
## [0.9.0] - 2023-05-02
|
|
|
|
### Added
|
|
|
|
- Add bare-bones PSRAM support for ESP32-S2 (#493)
|
|
- Add `DEBUG_ASSIST` functionality (#484)
|
|
- Add RSA peripheral support (#467)
|
|
- Add PeripheralClockControl argument to `timg`, `wdt`, `sha`, `usb-serial-jtag` and `uart` constructors (#463)
|
|
- Added API to raise and reset software interrupts (#426)
|
|
- Implement `embedded_hal_nb::serial::*` traits for `UsbSerialJtag` (#498)
|
|
|
|
### Fixed
|
|
|
|
- Fix `get_wakeup_cause` comparison error (#472)
|
|
- Use 192 as mclk_multiple for 24-bit I2S (#471)
|
|
- Fix `CpuControl::start_app_core` signature (#466)
|
|
- Move `rwtext` after other RAM data sections (#464)
|
|
- ESP32-C3: Disable `usb_pad_enable` when setting GPIO18/19 to input/output (#461)
|
|
- Fix 802.15.4 clock enabling (ESP32-C6) (#458)
|
|
|
|
### Changed
|
|
|
|
- Update `embedded-hal-async` and `embassy-*` dependencies (#488)
|
|
- Update to `embedded-hal@1.0.0-alpha.10` and `embedded-hal-nb@1.0.0-alpha.2` (#487)
|
|
- Let users configure the LEDC output pin as open-drain (#474)
|
|
- Use bitflags to decode wakeup cause (#473)
|
|
- Minor linker script additions (#470)
|
|
- Minor documentation improvements (#460)
|
|
|
|
### Removed
|
|
|
|
- Remove unnecessary generic from `UsbSerialJtag` driver (#492)
|
|
- Remove `#[doc(inline)]` from esp-hal-common re-exports (#490)
|
|
|
|
## [0.8.0] - 2023-03-27
|
|
|
|
## [0.7.1] - 2023-02-22
|
|
|
|
## [0.7.0] - 2023-02-21
|
|
|
|
## [0.5.0] - 2023-01-26
|
|
|
|
## [0.4.0] - 2022-12-12
|
|
|
|
## [0.3.0] - 2022-11-17
|
|
|
|
## [0.2.0] - 2022-09-13
|
|
|
|
## [0.1.0] - 2022-08-05
|
|
|
|
[unreleased]: https://github.com/esp-rs/esp-hal/compare/v0.9.0...HEAD
|
|
[0.9.0]: https://github.com/esp-rs/esp-hal/compare/v0.8.0...v0.9.0
|
|
[0.8.0]: https://github.com/esp-rs/esp-hal/compare/v0.7.1...v0.8.0
|
|
[0.7.1]: https://github.com/esp-rs/esp-hal/compare/v0.7.0...v0.7.1
|
|
[0.7.0]: https://github.com/esp-rs/esp-hal/compare/v0.5.0...v0.7.0
|
|
[0.5.0]: https://github.com/esp-rs/esp-hal/compare/v0.4.0...v0.5.0
|
|
[0.4.0]: https://github.com/esp-rs/esp-hal/compare/v0.3.0...v0.4.0
|
|
[0.3.0]: https://github.com/esp-rs/esp-hal/compare/v0.2.0...v0.3.0
|
|
[0.2.0]: https://github.com/esp-rs/esp-hal/compare/v0.1.0...v0.2.0
|
|
[0.1.0]: https://github.com/esp-rs/esp-hal/releases/tag/v0.1.0
|