b0126243c0
* Fix clearing interrupt status * Use simpler way to clear bits * Add note about xtensa * Add to changelog
160 lines
6.4 KiB
Markdown
160 lines
6.4 KiB
Markdown
# Changelog
|
|
|
|
All notable changes to this project will be documented in this file.
|
|
|
|
Please note that only changes to the `esp-hal-common` package are tracked in this CHANGELOG.
|
|
|
|
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
|
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
|
|
|
## [Unreleased]
|
|
|
|
### Added
|
|
|
|
- Add initial LP-IO support for ESP32-C6 (#639)
|
|
- Implement sleep with some wakeup methods for `esp32` (#574)
|
|
- Add a new RMT driver (#653, #667)
|
|
|
|
### Changed
|
|
|
|
- Update `embedded-hal-*` alpha packages to their latest versions (#640)
|
|
- Implement the `Clone` and `Copy` traits for the `Rng` driver (#650)
|
|
|
|
### Fixed
|
|
|
|
- USB device support is working again (#656)
|
|
- Add missing interrupt status read for esp32s3, which fixes USB-SERIAL-JTAG interrupts (#664)
|
|
- GPIO interrupt status bits are now properly cleared (#670)
|
|
|
|
### Removed
|
|
|
|
- Remove the `allow-opt-level-z` feature from `esp32c3-hal` (#654)
|
|
|
|
## [0.10.0] - 2023-06-04
|
|
|
|
### Added
|
|
|
|
- Add `WithDmaSpi3` to prelude for ESP32S3 (#623)
|
|
- Add bare-bones PSRAM support for ESP32 (#506)
|
|
- Add initial support for the ESP32-H2 (#513, #526, #527, #528, #530, #538, #544, #548, #551, #556, #560, #566, #549, #564, #569, #576, #577, #589, #591, #597)
|
|
- Add bare-bones PSRAM support for ESP32-S3 (#517)
|
|
- Add async support to the I2C driver (#519)
|
|
- Implement Copy and Eq for EspTwaiError (#540)
|
|
- Add LEDC hardware fade support (#475)
|
|
- Added support for multicore async GPIO (#542)
|
|
- Add a fn to poll DMA transfers (#559)
|
|
- Add unified field-based efuse access (#567)
|
|
- Move `esp-riscv-rt` into esp-hal (#578)
|
|
- Add CRC functions from ESP ROM (#587)
|
|
- Add a `debug` feature to enable the PACs' `impl-register-debug` feature (#596)
|
|
- Add initial support for `I2S` in ESP32-H2 (#597)
|
|
- Add octal PSRAM support for ESP32-S3 (#610)
|
|
- Add MD5 functions from ESP ROM (#618)
|
|
- Add embassy async `read` support for `uart` (#620)
|
|
- Add bare-bones support to run code on ULP-RISCV / LP core (#631)
|
|
- Add ADC calibration implementation for a riscv chips (#555)
|
|
|
|
### Changed
|
|
|
|
- Simplify the `Delay` driver, derive `Clone` and `Copy` (#568)
|
|
- DMA types can no longer be constructed by the user (#625)
|
|
- Move core interrupt handling from Flash to RAM for RISC-V chips (ESP32-H2, ESP32-C2, ESP32-C3, ESP32-C6) (#541)
|
|
- Change LED pin to GPIO2 in ESP32 blinky example (#581)
|
|
- Update ESP32-H2 and ESP32-C6 clocks and remove `i2c_clock` for all chips but ESP32 (#592)
|
|
- Use both timers in `TIMG0` for embassy time driver when able (#609)
|
|
- Re-work `RadioExt` implementations, add support for ESP32-H2 (#627)
|
|
- Improve examples documentation (#533)
|
|
- esp32h2-hal: added README (#585)
|
|
- Update `esp-hal-procmacros` package dependencies and features (#628)
|
|
|
|
### Fixed
|
|
|
|
- Corrected the expected DMA descriptor counts (#622, #625)
|
|
- DMA is supported for SPI3 on ESP32-S3 (#507)
|
|
- `change_bus_frequency` is now available on `SpiDma` (#529)
|
|
- Fixed a bug where a GPIO interrupt could erroneously fire again causing the next `await` on that pin to instantly return `Poll::Ok` (#537)
|
|
- Set `vecbase` on core 1 (ESP32, ESP32-S3) (#536)
|
|
- ESP32-S3: Move PSRAM related function to RAM (#546)
|
|
- ADC driver will now apply attenuation values to the correct ADC's channels. (#554)
|
|
- Sometimes half-duplex non-DMA SPI reads were reading garbage in non-release mode (#552)
|
|
- ESP32-C3: Fix GPIO5 ADC channel id (#562)
|
|
- ESP32-H2: Fix direct-boot feature (#570)
|
|
- Fix Async GPIO not disabling interupts on chips with multiple banks (#572)
|
|
- ESP32-C6: Support FOSC CLK calibration for ECO1+ chip revisions (#593)
|
|
- Fixed CI by pinning the log crate to 0.4.18 (#600)
|
|
- ESP32-S3: Fix calculation of PSRAM start address (#601)
|
|
- Fixed wrong variable access (FOSC CLK calibration for ESP32-C6 #593)
|
|
- Fixed [trap location in ram](https://github.com/esp-rs/esp-hal/pull/605#issuecomment-1604039683) (#605)
|
|
- Fix rom::crc docs (#611)
|
|
- Fixed a possible overlap of `.data` and `.rwtext` (#616)
|
|
- Avoid SDA/SCL being low while configuring pins for I2C (#619)
|
|
|
|
### Breaking
|
|
|
|
- Simplified user-facing SpiDma and I2s types (#626)
|
|
- Significantly simplified user-facing GPIO pin types. (#553)
|
|
- No longer re-export the `soc` module and the contents of the `interrupt` module at the package level (#607)
|
|
|
|
## [0.9.0] - 2023-05-02
|
|
|
|
### Added
|
|
|
|
- Add bare-bones PSRAM support for ESP32-S2 (#493)
|
|
- Add `DEBUG_ASSIST` functionality (#484)
|
|
- Add RSA peripheral support (#467)
|
|
- Add PeripheralClockControl argument to `timg`, `wdt`, `sha`, `usb-serial-jtag` and `uart` constructors (#463)
|
|
- Added API to raise and reset software interrupts (#426)
|
|
- Implement `embedded_hal_nb::serial::*` traits for `UsbSerialJtag` (#498)
|
|
|
|
### Fixed
|
|
|
|
- Fix `get_wakeup_cause` comparison error (#472)
|
|
- Use 192 as mclk_multiple for 24-bit I2S (#471)
|
|
- Fix `CpuControl::start_app_core` signature (#466)
|
|
- Move `rwtext` after other RAM data sections (#464)
|
|
- ESP32-C3: Disable `usb_pad_enable` when setting GPIO18/19 to input/output (#461)
|
|
- Fix 802.15.4 clock enabling (ESP32-C6) (#458)
|
|
- ESP32-S3: Disable usb_pad_enable when setting GPIO19/20 to input/output (#645)
|
|
|
|
### Changed
|
|
|
|
- Update `embedded-hal-async` and `embassy-*` dependencies (#488)
|
|
- Update to `embedded-hal@1.0.0-alpha.10` and `embedded-hal-nb@1.0.0-alpha.2` (#487)
|
|
- Let users configure the LEDC output pin as open-drain (#474)
|
|
- Use bitflags to decode wakeup cause (#473)
|
|
- Minor linker script additions (#470)
|
|
- Minor documentation improvements (#460)
|
|
|
|
### Removed
|
|
|
|
- Remove unnecessary generic from `UsbSerialJtag` driver (#492)
|
|
- Remove `#[doc(inline)]` from esp-hal-common re-exports (#490)
|
|
|
|
## [0.8.0] - 2023-03-27
|
|
|
|
## [0.7.1] - 2023-02-22
|
|
|
|
## [0.7.0] - 2023-02-21
|
|
|
|
## [0.5.0] - 2023-01-26
|
|
|
|
## [0.4.0] - 2022-12-12
|
|
|
|
## [0.3.0] - 2022-11-17
|
|
|
|
## [0.2.0] - 2022-09-13
|
|
|
|
## [0.1.0] - 2022-08-05
|
|
|
|
[Unreleased]: https://github.com/esp-rs/esp-hal/compare/v0.10.0...HEAD
|
|
[0.10.0]: https://github.com/esp-rs/esp-hal/compare/v0.9.0...v0.10.0
|
|
[0.9.0]: https://github.com/esp-rs/esp-hal/compare/v0.8.0...v0.9.0
|
|
[0.8.0]: https://github.com/esp-rs/esp-hal/compare/v0.7.1...v0.8.0
|
|
[0.7.1]: https://github.com/esp-rs/esp-hal/compare/v0.7.0...v0.7.1
|
|
[0.7.0]: https://github.com/esp-rs/esp-hal/compare/v0.5.0...v0.7.0
|
|
[0.5.0]: https://github.com/esp-rs/esp-hal/compare/v0.4.0...v0.5.0
|
|
[0.4.0]: https://github.com/esp-rs/esp-hal/compare/v0.3.0...v0.4.0
|
|
[0.3.0]: https://github.com/esp-rs/esp-hal/compare/v0.2.0...v0.3.0
|
|
[0.2.0]: https://github.com/esp-rs/esp-hal/compare/v0.1.0...v0.2.0
|
|
[0.1.0]: https://github.com/esp-rs/esp-hal/releases/tag/v0.1.0
|