| .. |
|
adc_cal.rs
|
Make C6 ADC calibration work properly again (#1911)
|
2024-08-08 11:52:08 +00:00 |
|
adc.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
advanced_serial.rs
|
Rework Uart constructors, add UartTx and UartRx constuctors. (#1592)
|
2024-06-11 13:07:17 +00:00 |
|
blinky_erased_pins.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
blinky.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
dac.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
debug_assist.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
dma_extmem2mem.rs
|
Implement DMA to/from psram on esp32s3 (#1827)
|
2024-07-25 12:51:02 +00:00 |
|
dma_mem2mem.rs
|
support dma chunk sizes other than 4092 (#1758)
|
2024-07-15 12:00:33 +00:00 |
|
embassy_hello_world.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_i2c_bmp180_calibration_data.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_i2c.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_i2s_read.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_i2s_sound.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_multicore_interrupt.rs
|
Use peripheral ref pattern for OneShotTimer and PeriodicTimer` (#1855)
|
2024-07-25 12:52:34 +00:00 |
|
embassy_multicore.rs
|
Use peripheral ref pattern for OneShotTimer and PeriodicTimer` (#1855)
|
2024-07-25 12:52:34 +00:00 |
|
embassy_multiprio.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
embassy_parl_io_rx.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_parl_io_tx.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_rmt_rx.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_rmt_tx.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_serial.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
embassy_spi.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
embassy_touch.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_twai.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_usb_serial_jtag.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_usb_serial.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
embassy_wait.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
etm_blinky_systimer.rs
|
Improve SYSTIMER API (#1871)
|
2024-08-16 14:59:34 +00:00 |
|
etm_gpio.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
etm_timer.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
flash_read_write.rs
|
Add esp-storage to esp-hal repo (#1627)
|
2024-05-27 15:28:05 +00:00 |
|
gpio_interrupt.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
hello_rgb.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
hello_world.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
hmac.rs
|
esp-hal: Add runnable doctests to peripheral drivers (#1663)
|
2024-06-11 10:18:09 +00:00 |
|
i2c_bmp180_calibration_data.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
i2c_display.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
i2s_read.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
i2s_sound.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
ieee802154_receive_all_frames.rs
|
Add the esp-ieee802154 package to the repository (#1554)
|
2024-05-15 15:22:27 +00:00 |
|
ieee802154_receive_frame.rs
|
Add the esp-ieee802154 package to the repository (#1554)
|
2024-05-15 15:22:27 +00:00 |
|
ieee802154_send_broadcast_frame.rs
|
Add the esp-ieee802154 package to the repository (#1554)
|
2024-05-15 15:22:27 +00:00 |
|
ieee802154_send_frame.rs
|
Add the esp-ieee802154 package to the repository (#1554)
|
2024-05-15 15:22:27 +00:00 |
|
ieee802154_sniffer.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
lcd_cam_ov2640.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
lcd_i8080.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
ledc.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
lp_core_basic.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
lp_core_i2c.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
lp_core_uart.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
mcpwm.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
multicore.rs
|
Remove the SystemExt trait and rename SystemParts to SystemControl (#1495)
|
2024-04-23 13:25:03 +00:00 |
|
parl_io_rx.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
parl_io_tx.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
pcnt_encoder.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
psram_octal.rs
|
Rename PSRAM examples for better discoverability (#1675)
|
2024-06-12 14:23:55 +00:00 |
|
psram_quad.rs
|
Rename PSRAM examples for better discoverability (#1675)
|
2024-06-12 14:23:55 +00:00 |
|
qspi_flash.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
ram.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
read_efuse.rs
|
Unify: Remove the chip-specific HAL packages, adapt esp-hal for direct use [1/?] (#1196)
|
2024-02-27 14:10:11 +00:00 |
|
rmt_rx.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
rmt_tx.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
rng.rs
|
Make examples less dependent on embedded-hal where able (#1342)
|
2024-03-25 13:14:22 +00:00 |
|
rtc_time.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
rtc_watchdog.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
serial_interrupts.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
sleep_timer_ext0.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
sleep_timer_ext1.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
sleep_timer_lpio.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
sleep_timer_rtcio.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
sleep_timer.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
software_interrupts.rs
|
Remove the SystemExt trait and rename SystemParts to SystemControl (#1495)
|
2024-04-23 13:25:03 +00:00 |
|
spi_halfduplex_read_manufacturer_id.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
spi_loopback_dma.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
spi_loopback.rs
|
gpio: Make AnyPin, AnyInputOnlyPin, DummyPin available from gpio module (#1918)
|
2024-08-26 18:30:24 +00:00 |
|
spi_slave_dma.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
systimer.rs
|
Fix C2 delays (#1981)
|
2024-08-21 17:33:46 +00:00 |
|
timer_interrupt.rs
|
Implement InterruptConfigurable (#1819)
|
2024-07-18 13:37:46 +00:00 |
|
touch.rs
|
Touch support for ESP32 (#1873)
|
2024-08-06 07:19:41 +00:00 |
|
twai.rs
|
Add self-testing mode for TWAI peripheral. (#1929)
|
2024-08-12 15:22:27 +00:00 |
|
ulp_riscv_core_basic.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
usb_serial_jtag.rs
|
usb-serial-jtag example: Hint for Windows users (#1845)
|
2024-07-23 19:23:35 +00:00 |
|
usb_serial.rs
|
esp-hal: Add (where missing) used GPIOs to example descriptions (#1810)
|
2024-07-17 08:34:13 +00:00 |
|
watchdog.rs
|
[1/3] Timer abstraction: refactor systimer and timer modules into a common timer module (#1527)
|
2024-05-02 13:27:33 +00:00 |
|
wifi_80211_tx.rs
|
Implement Sniffer API (#1935)
|
2024-08-19 06:51:18 +00:00 |
|
wifi_access_point_with_sta.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
wifi_access_point.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
wifi_bench.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
wifi_ble.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
wifi_coex.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
wifi_dhcp.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
wifi_embassy_access_point_with_sta.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
wifi_embassy_access_point.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
wifi_embassy_bench.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
wifi_embassy_ble.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
wifi_embassy_dhcp.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
wifi_embassy_esp_now_duplex.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
wifi_embassy_esp_now.rs
|
Prefer cfg_if (#2003)
|
2024-08-27 11:53:55 +00:00 |
|
wifi_esp_now.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
|
wifi_sniffer.rs
|
Implement Sniffer API (#1935)
|
2024-08-19 06:51:18 +00:00 |
|
wifi_static_ip.rs
|
Simplify initialization APIs (#1957)
|
2024-08-16 16:33:29 +00:00 |
