GetLitFam/esp-hal
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
2371c30542
esp-hal/CHANGELOG.md
Dániel Buga 2371c30542
Simplify user-facing DMA channel types (#626) 
* Introduce a trait for DMA channels

This trait is then used to hold types related to the particular DMA channel. This change allows us to simplify user-facing types.

* Remove private type from I2s

* Remove redundant spi3 example, update examples

* Merge markdown sections

* Add changelog entry
2023-06-28 13:03:49 +01:00

5.4 KiB
Raw Blame History

Changelog

All notable changes to this project will be documented in this file.

Please note that only changes to the esp-hal-common package are tracked in this CHANGELOG.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

Unreleased

Added

  • Add WithDmaSpi3 to prelude for ESP32S3 (#623)
  • Add bare-bones PSRAM support for ESP32 (#506)
  • Add initial support for the ESP32-H2 (#513, #526, #527, #528, #530, #538, #544, #548, #551, #556, #560, #566, #549, #564, #569, #576, #577, #589, #591, #597)
  • Add bare-bones PSRAM support for ESP32-S3 (#517)
  • Add async support to the I2C driver (#519)
  • Implement Copy and Eq for EspTwaiError (#540)
  • Add LEDC hardware fade support (#475)
  • Added support for multicore async GPIO (#542)
  • Add a fn to poll DMA transfers (#559)
  • Simplify the Delay driver, derive Clone and Copy (#568)
  • Fix Async GPIO not disabling interupts on chips with multiple banks (#572)
  • Add unified field-based efuse access (#567)
  • Move esp-riscv-rt into esp-hal (#578)
  • Add CRC functions from ESP ROM (#587)
  • Add a debug feature to enable the PACs' impl-register-debug feature (#596)
  • Add initial support for I2S in ESP32-H2 (#597)
  • Fix rom::crc docs
  • Add octal PSRAM support for ESP32-S3 (#610)
  • Add MD5 functions from ESP ROM (#618)
  • Add embassy async read support for uart (#620)

Changed

  • DMA types can no longer be constructed by the user (#625)
  • Move core interrupt handling from Flash to RAM for RISC-V chips (ESP32-H2, ESP32-C2, ESP32-C3, ESP32-C6) (#541)
  • Change LED pin to GPIO2 in ESP32 blinky example (#581)
  • Update ESP32-H2 and ESP32-C6 clocks and remove i2c_clock for all chips but ESP32 (#592)
  • Use both timers in TIMG0 for embassy time driver when able (#609)
  • Re-work RadioExt implementations, add support for ESP32-H2 (#627)
  • Improve examples documentation (#533)
  • esp32h2-hal: added README (#585)

Fixed

  • Corrected the expected DMA descriptor counts (#622, #625)
  • DMA is supported for SPI3 on ESP32-S3 (#507)
  • change_bus_frequency is now available on SpiDma (#529)
  • Fixed a bug where a GPIO interrupt could erroneously fire again causing the next await on that pin to instantly return Poll::Ok (#537)
  • Set vecbase on core 1 (ESP32, ESP32-S3) (#536)
  • ESP32-S3: Move PSRAM related function to RAM (#546)
  • ADC driver will now apply attenuation values to the correct ADC's channels. (#554)
  • Sometimes half-duplex non-DMA SPI reads were reading garbage in non-release mode (#552)
  • ESP32-C3: Fix GPIO5 ADC channel id (#562)
  • ESP32-H2: Fix direct-boot feature (#570)
  • ESP32-C6: Support FOSC CLK calibration for ECO1+ chip revisions (#593)
  • Fixed CI by pinning the log crate to 0.4.18 (#600)
  • ESP32-S3: Fix calculation of PSRAM start address
  • Fixed wrong variable access (FOSC CLK calibration for ESP32-C6 #593)
  • Fixed trap location in ram (#605)
  • Fixed a possible overlap of .data and .rwtext (#616)
  • Avoid SDA/SCL being low while configuring pins for I2C

Breaking

  • Simplified user-facing SpiDma and I2s types (#626)
  • Significantly simplified user-facing GPIO pin types. (#553)
  • No longer re-export the soc module and the contents of the interrupt module at the package level (#607)

0.9.0 - 2023-05-02

Added

  • Add bare-bones PSRAM support for ESP32-S2 (#493)
  • Add DEBUG_ASSIST functionality (#484)
  • Add RSA peripheral support (#467)
  • Add PeripheralClockControl argument to timg, wdt, sha, usb-serial-jtag and uart constructors (#463)
  • Added API to raise and reset software interrupts (#426)
  • Implement embedded_hal_nb::serial::* traits for UsbSerialJtag (#498)

Fixed

  • Fix get_wakeup_cause comparison error (#472)
  • Use 192 as mclk_multiple for 24-bit I2S (#471)
  • Fix CpuControl::start_app_core signature (#466)
  • Move rwtext after other RAM data sections (#464)
  • ESP32-C3: Disable usb_pad_enable when setting GPIO18/19 to input/output (#461)
  • Fix 802.15.4 clock enabling (ESP32-C6) (#458)

Changed

  • Update embedded-hal-async and embassy-* dependencies (#488)
  • Update to embedded-hal@1.0.0-alpha.10 and embedded-hal-nb@1.0.0-alpha.2 (#487)
  • Let users configure the LEDC output pin as open-drain (#474)
  • Use bitflags to decode wakeup cause (#473)
  • Minor linker script additions (#470)
  • Minor documentation improvements (#460)

Removed

  • Remove unnecessary generic from UsbSerialJtag driver (#492)
  • Remove #[doc(inline)] from esp-hal-common re-exports (#490)

0.8.0 - 2023-03-27

0.7.1 - 2023-02-22

0.7.0 - 2023-02-21

0.5.0 - 2023-01-26

0.4.0 - 2022-12-12

0.3.0 - 2022-11-17

0.2.0 - 2022-09-13

0.1.0 - 2022-08-05