* Use latest `esp32c6-lp` package and fix breaking changes
* `esp32c2-hal` and `esp32c3-hal` mostly building (with no features...)
* C6 and H2 sort of close I guess, idk
* どうして。。。
* *Incoherent screaming*
* HAHA ESP32-HAL BUILDS!!!
* C2 and C3 are building!
* S2 builds!
* S3 builds!
* Fix ESP32 (again)
* ???
* Use git dependencies instead of local paths for PACs
* Fix some errors after a dodgy rebase
* Remove unnecessary constants for ESP32
* Fix RSA multiplication (math is hard)
* Executor related touchups
* Make log optional
* Add defmt feature and derive on Debug structs
* Test both log drivers
* Update esp-println
* Document defmt msrv
* direct vectoring support added
* provide minimal handlers for hooking the vector table directly
* changed direct vectoring interrupt enable interface to map to CPU interrupt
* direct vectoring interrupt nesting
* removed unused dependency
* added tentative c2 and c6 support for direct vector table hooking
* added direct vectoring examples
* added direct vectoring examples
* updated changelog
* added direct vectoring to CI
* Added H2 support and example, moved helpers to esp-hal-common
* Added H2 direct vectoring example to CI
* Removed remnants of removed feature
* C6 and H2 examples fixed
* C6 and H2 examples fixed
* C6 and H2 examples fixed
* Comment fixed
* Added preemption flag to RT
---------
Co-authored-by: Scott Mabin <scott@mabez.dev>
* Create issue_handler.yml
* No longer re-export `embedded-hal`, hide exported macros in documentation
* Add simple package-level documentation for each HAL package
* Clean up/simplify re-exports
* Fix the examples that I broke
* Ensure top-level modules/types/functions have doc comments
* Update CHANGELOG
* Re-export the `soc::psram` module where available
---------
Co-authored-by: Sergio Gasquez Arcos <sergio.gasquez@gmail.com>
* Software interrupt support added, not sure if the code is good
* Added support for remaining SW interrupts
* Added support for remaining SW interrupts
* Added support for remaining SW interrupts
* Added support for esp32c2, esp32s2, esp32s3
* Added support for esp32c2, esp32s2, esp32s3
* Added support for esp32c2, esp32s2, esp32s3
* Added support for esp32c2, esp32s2, esp32s3
* Software interrupt example for esp32c3
* Added support for esp32c2, esp32s2, esp32s3
* Software interrupt example for esp32c3
* prio based preemption only, vector table reverted
* prio based preemption only, vector table reverted
* fixed a rare bug causing misaligned memory accesses
* fixed a rare bug causing misaligned memory accesses
* fixed a rare bug causing misaligned memory accesses
* fixed rare bug causing misaligned memory access when emulating atomics
* fixed a rare bug causing misaligned memory accesses
* fixed a rare bug causing misaligned memory accesses
* broke something
* broke something
* fixed alignment bug
* Tentative: added support for interrupt preemption without involving the rt
* Added feature enabling priority based interrupt preemption
* Fixed failed merge
* Tagged preemption helpers with inline always
* Disable interrupts before restoring context to avoid ruining it
* Fix max priority edge case
* Fix broken merge
* Added examples for the remaining RISC-V ESPs
* Update esp-hal-common/src/interrupt/riscv.rs
Co-authored-by: sethp <seth.pellegrino@gmail.com>
* Update esp32c2-hal/examples/interrupt_preemption.rs
Co-authored-by: sethp <seth.pellegrino@gmail.com>
* Update esp-hal-common/src/interrupt/riscv.rs
Co-authored-by: sethp <seth.pellegrino@gmail.com>
* Example comments courtesy of @sethp
* Reverted irrelevant changes, raised high prio interrupt to max prio
* Rolling back an irrelevant change
* Rolling back an irrelevant change
* Update esp-hal-common/src/interrupt/riscv.rs
Co-authored-by: Scott Mabin <scott@mabez.dev>
* Update esp-hal-common/src/interrupt/riscv.rs
Co-authored-by: Scott Mabin <scott@mabez.dev>
* Moved imports to avoid warnings, moved functions to ram, moved interrupt disable to before prio threshold is restored
* Added preemption for the ESP32C6
* Moved helper functions into the relevant modules, changed threshold for ESP32C6 to machine mode one
* ESP32C6 Threshold register changed to machine mode one, corrected threshold set.
---------
Co-authored-by: sethp <seth.pellegrino@gmail.com>
Co-authored-by: Scott Mabin <scott@mabez.dev>
* RISCV: Separate PLIC and non-PLIC
* De-duplicate code
* Write 0 to INTR_MAP again to disable peripheral interrupts
* Limit visibility of `get_assigned_cpu_interrupt`
* Move some linker scripts into `esp-hal-common` and update the build script
* Move `EspDefaultHandler` and `DefaultHandler` definitions into `esp-hal-common`
* Re-export everything from `esp-hal-common`
* Add a couple cfg symbols, cleanup/organize some exports/modules
* Create the `esp32c6-hal` package
* Teach `esp-hal-common` about the ESP32-C6
* Get a number of peripheral drivers building for the ESP32-C6
bckup
initial clocks_ii
* Create the `esp32c6-hal` package
C6: update
* Simplify and fix the linker script
update
* C6: add I2S
* Create the `esp32c6-hal` package
* Teach `esp-hal-common` about the ESP32-C6
* Get a number of peripheral drivers building for the ESP32-C6
bckup
initial clocks_ii
* Create the `esp32c6-hal` package
* C6: update
* Simplify and fix the linker script
* update
* C6: add I2S
* update
* C6 Interrupts
* C6: Update build.rs, linker scripts and initial examples
* C6: RMT
* Fix interrupt handling
* Fix `ClockControl::configure`
* C6: revert to I2S0 instead of just I2S
* C6: rebase and update
* RTC not buildable
* Implement RWDT and SWD disable
* C6: working LEDC
* C6: working RMT
* C6: add aes
* C6: add mcpwm
* C6: add rtc_cntln - not finished
* C6: update and formatting
* C6: add pcnt
* C6: add examples and format
* Remove inline assembly, fix interrupts and linker scripts
* Remove unused features, update cargo config for atomic emu, misc cleanup
* Get ADC building and example "working" (as much as it ever does)
* Remove a bunch of unused constants which were copied from ESP-IDF
* The `mcpwm` example now works correctly
* Get `TWAI` peripheral driver building for C6
* Clean up the `rtc_cntl` module and get all the other HALs building again
* Add the C6 to our CI workflow
* Fix various things that have been missed when rebasing
Still missing a few examples (`clock_monitor`, `embassy_spi`, `ram`)
* C6: Small updates in wdt (#1)
* C6: Update WDT
* C6: Update examples with WDT update
* Update `esp-println` dependency to fix build errors
* Fix formatting issues causing pre-commit hook to fail
* Get some more examples working
* Working `ram` example
* Sync with changes in `main` after rebasing
* Working `embassy_spi` example
* Use a git dependency for the PAC until we publish a release
* Fix I2S for ESP32-C6
* Fix esp32c6 direct boot (#4)
* Add direct boot support for C6
* Fix direct boot for c6
- Actually copy into rtc ram
- remove dummy section that is no longer needed (was just a waste of
flash space)
- Move RTC stuff before the no load sections
* Update RWDT and refactor RTC (#3)
* C6: Update RWDT and add example, refactor RTC and add not-really-good example
* Update based on review comments, resolve bunch of warnings and run cargo fmt
* Update C6 esp-pacs rev commit
* Fix clocks_ll/esp32c6.rs
* Fix riscv interrupts
* Remove clock_monitor example for now
* RAM example works in direct-boot mode
* Add a TODO for &mut TIMG0 and cargo fmt
* Fix linker script after a bad rebase
* Update CI and Cargo.toml embassy required features
* use riscv32imac-unknown-none-elf target for C6 in CI
* change default target to riscv32imac-unknown-none-elf
* add riscv32imac-unknown-none-elf target to MSRV job
* another cleanup
---------
Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de>
Co-authored-by: Jesse Braham <jesse@beta7.io>
* Make required changes to include new `RADIO` peripheral
* Use published versions of PAC and `esp-println`
* Use the correct target extensions (`imac`)
* Fix the super watchdog timer, plus a few more examples
* Fix UART clock configuration
* Make sure to sync UART registers when configuring AT cmd detection
* Disable APM in direct-boot mode
* Address a number of review comments
* Fix `SPI` clocks and `rtc_watchdog` example (#6)
* fix SPI clocks
* run cargo fmt
* Add comment about used default clk src
* Fix rtc_watchdog example in BL mode
* run cargo fmt
* Update rtc_watchdog example that it works in DB mode
* README and example fixes/cleanup
* Add I2C peripheral enable and reset
* Fix `ApbSarAdc` configuration in `system.rs`
---------
Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de>
Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com>
Co-authored-by: Juraj Sadel <jurajsadel@gmail.com>
Co-authored-by: Scott Mabin <scott@mabez.dev>
* Update PACs and modify `esp-hal-common` to use new `esp-riscv-rt` package
* Update `esp32c2-hal` and `esp32c3-hal` to use `esp-riscv-rt` as well
* Update all RISC-V examples to use `esp-riscv-rt`
* Update RISC-V trap frame handling according to review feedback
* Peripheral ref/sha (#312)
* Add SHA to list of peripherals to be created
* Refactor SHA peripheral to use PeripheralRef
* Update SHA examples to get them building again
* Fix async time drivers
* Fix usb otg
* Fix s3
Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com>
* Add the peripheral module plus some helper macros in preparation
* peripheral macro
* Add peripheral generation macro
* Fixes after rebase
* Update the signature of Peripherals::take
* syncronise hello world example
* fmt the entire repo
Co-authored-by: Jesse Braham <jesse@beta7.io>
* wip: timg embassy driver
- read_raw on timg renamed to now()
- timg initialized and stored in static for use in the embassy driver
- timg sets alarm value
- untested whether alarms actually trigger
* TIMG timer driver for esp32, esp32s3
- Adds the timg timer block as a time driver for embassy
- Not enabled on the C3 as it only has one timer block, better to use
systimer
- s2 example added but can't build due to atomic requirements in
futures-core
* Add S2 atomic support with emulation, fixup embassy support for the S2
* Move executor & static-cell to dev deps. Make eha optional
* Add c2 support, run fmt
* Update to crates.io embassy releases
* Update eha
* update timg time driver to new trait
* Remove exception feature of esp-backtrace and use the user handler for backtracing
* Add async testing workflow
* Update systick example
* Fix S2 examples
* Update xtensa-toolchain
* set rustflags for s2 target
* Disable systick for esp32s2 until we can fix the noted issues
* review improvements
- Fix intr prio array being off by one
- emabssy time prio interrupt set to max prio
- use cfg instead of feature for systick detection
* Update example time delays
* Update the build script to inject a configuration value for the enabled chip
* Update all cfg gates to use the new symbols instead of the chip features
* Inject architecture and core count symbols as well, update as needed
* Organize the imports and exports of `esp-hal-common`
Instead of building a table of _all_ configured interrupts,
we now only check the currently _pending_ interrupts configuration
status. This means in the best case scenario we only ever do _one_
lookup instead of the 60~ we did before.
Tested on esp32c3, gpio_interrupt:
Before: 850cycles from `handler_interrupts` to the actual handler
After: 125cycles
* RISCV interrupt vectoring
- Adds support for vectoring peripheral interrupts to PAC handlers
- Currently supports level interrupts with priorities from 1-15
- Updated the gpio interrupt example to reflect the new changes
* remove .vscode files
* Support vectored edge interrupts
This is as simple as making sure we clear the CPU interrupt whenever we
receive one. This also documents further what APIs are safe to call when
the `vectored` feature is enabled.
* fix all examples to use vectoring
* doc & cleanup
* run handlers from ram
* make xtensa::interrupt::vectored private, we rexport public items
* fix default handlers
* pass interrupt into EspDefaultHandler
* Xtensa interrupt vectoring: peripheral source
- Initial Xtensa vectoring, updated esp32 gpio example to use new interrupt macro.
- Only peripheral sources supported.
- Only level one priority supported.
- CPU & Edge interrupts still need to be handled.
* Xtensa interrupt vectoring: CPU & EDGE
- Add support for handling CPU interrupts and edge interrupts
- PR required to xtensa-lx-rt for CPU handlers
* Xtensa interrupt vectoring: Priority
- Finally implement priortization
- Only three priorities available at the moment. Xtensa programmer guide
discourages using highpri interrupts in Rust/C. Guide also mentions
using software priortization to increase the number of Priorities
available
* support CPU interrupts, using patch xtensa-lx-rt
* Update example
* Add support & examples for the s2 & s3 too
* Fix formatting and missing imports
* Run interrupt handling in ram, optionally run the vector handler in ram in the examples
* Use xtensa_lx::Mutex CS when enabling interrupts
* Run clippy on each target
* Remove redundant features
* Fix C3 builds
* make enable unsafe. Add note about preallocated interrupts in vectored mode.
* Remove `INTERRUPT_LEVELS` static
The interrupt levels static introduces a few issues
- A lock is needed when configuring interrupts to keep
INTERRUPT_LEVELS in a consistent state
- Interrupts enabled from outside the Rust domain wouldn't be
serviced, this is the case with the wifi blobs
To remove it, the prioty configuration is now calculated dynamically in
the interrupt handler. Essentially INTERRUPT_LEVELS is now created once
the interrupt triggers. It has some benefits, such as only having to
look at interrupts configured on the current core, not both, but there
is of course an overhead with doing this in the interrupt.
* Allow raw interrupts on levels 4-7, whilst also supporting vectoring on levels 1-3
* rename core number features
* Fix examples and formatting
* use xtensa-lx-rt release, update pacs
* Support passing the trap frame into interrupt handlers
* cfg away the #[interrupt] macro when not using vectoring
* rename enable to map
move vectored feature to chip specific hals
* export vectored functions
- rename `enable_with_priority` to `enable`
- add docs for interrupt macro
* Update all examples to use vectored interrupts
