* Use all remaining memory for stack(s)
* Remove HEAP related code from RISCV linker scripts
* Fix direct-boot / mcu-boot linker scripts
* Use a statically allocated stack for core-1
* feat: relocate riscv isr to iram
Previously, the trap vector itself and its immediate callees
(`_start_trap` and `_start_trap_rust_hal`) were located in the mapped
instruction flash range `0x420..`, increasing cache pressure and adding
variable latency to the very beginning of the interrupt/exception
service flow.
This change places those routines in iram directly:
```
Num: Value Size Type Bind Vis Ndx Name
48177: 40380280 2428 FUNC GLOBAL DEFAULT 6 _start_trap_rust_hal
48197: 40380bfc 54 FUNC GLOBAL DEFAULT 6 _start_trap_rust
48265: 40380200 0 FUNC GLOBAL DEFAULT 6 _vector_table
48349: 40380100 0 NOTYPE GLOBAL DEFAULT 6 default_start_trap
48350: 40380100 0 NOTYPE GLOBAL DEFAULT 6 _start_trap
```
As seen via `readelf -W -s -C ./target/riscv32imc-unknown-none-elf/debug/examples/gpio_interrupt | grep -E _start_trap\|_vector\|Ndx`
* feat(riscv): place .trap in RAM
This change follows through on relocating the `_vector_table`,
`_start_trap`, and `_start_trap_rust` functions for all present
build/link modes for the 'c2, 'c3, 'c6, and 'h2.
It has been tested by running the `software_interrupts` example for the
'c3 in direct-boot and esp-bootloader contexts, but I wasn't able to
identify how to run the `mcu-boot` mode for the 'c3, nor do I have
present access to any of the other devices for testing.
* docs: Update CHANGELOG.md
* esp32 & esp32s2 sharing scripts
* add wokwi files
* Add fixup section for esp32s2, fix ordering of sectino includes
* Remove debug asm file
* Use shared linker scripts for s3 with fixups
* Add external.x sections back
* Move ld scripts into esp-hal-common
* esp32c3 unified linker scripts
- rework original c3 script to use the xtensa named sections
(e.g, _SECTIONNAME_start)
- Add fixups in esp32c3 specific linker
- Remove useless text section start and end (not required when using any
form of bootloader)
* Add RTC alias'. Move some shared fixups to a file
* comment and cleanup
* unify c2 linker script
* unify c6 linker script
* remove debug configs
* use new esp-riscv-rt
* fmt
* align db symbol names
* fix s3 db
* Update PACs and modify `esp-hal-common` to use new `esp-riscv-rt` package
* Update `esp32c2-hal` and `esp32c3-hal` to use `esp-riscv-rt` as well
* Update all RISC-V examples to use `esp-riscv-rt`
* Update RISC-V trap frame handling according to review feedback
Previously it assumed that the entry point was allocated at the
beginning of the ".rwtext" output section, which is not always true.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
