esp-hal/esp32c3-hal
2022-02-28 08:47:37 +01:00
..
.cargo Support atomic emulation for ESP32C3 if needed 2022-02-24 15:40:41 +00:00
.vscode Add basic interrupt support for ESP32C3 and ESP32 2022-01-31 16:34:45 +00:00
bin Depend on the published riscv-rt 2022-02-24 15:40:41 +00:00
examples Don't disable RWDT boot protection in RAM examples 2022-02-28 08:47:37 +01:00
ld Depend on the published riscv-rt 2022-02-24 15:40:41 +00:00
src Fix mutability assumptions of RTC_CNTL for ESP32C3 2022-02-25 23:41:11 +01:00
asm.bat Add basic interrupt support for ESP32C3 and ESP32 2022-01-31 16:34:45 +00:00
asm.S Depend on the published riscv-rt 2022-02-24 15:40:41 +00:00
build.rs Move linker scripts to sub-folders 2022-02-18 12:00:05 +01:00
Cargo.toml Support atomic emulation for ESP32C3 if needed 2022-02-24 15:40:41 +00:00
README.md Various updates all READMEs 2022-01-12 13:52:01 -08:00

esp32c3-hal

Crates.io docs.rs Crates.io Matrix

no_std HAL for the ESP32-C3 from Espressif. Implements a number of the traits defined by embedded-hal.

This device uses the RISC-V ISA, which is officially supported by the Rust compiler via the riscv32imc-unknown-none-elf target. Refer to the Getting Stared section below for more information.

Documentation

Getting Started

Installing the Rust Compiler Target

The compilation target for this device is officially supported via the stable release channel and can be installed via rustup:

$ rustup target add riscv32imc-unknown-none-elf

License

Licensed under either of:

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.