db409ffe7b
* Unify the system peripheral Whilst the PCR, SYSTEM and DPORT peripherals are different, we currently use them all in the same way. This PR unifies the peripheral name in the hal to `SYSTEM`. The idea is that they all do the same sort of thing, so we can collect them under the same name, and later down the line we can being to expose differences under an extended API. The benifits to this are imo quite big, the examples now are all identical, which makes things easier for esp-wifi, and paves a path towards the multichip hal. Why not do this in the PAC? Imo the pac should be as close to the hardware as possible, and the HAL is where we should abstractions such as this. * changelog
101 lines
2.6 KiB
Rust
101 lines
2.6 KiB
Rust
//! SPI read manufacturer id from flash chip
|
|
//!
|
|
//! Folowing pins are used:
|
|
//! SCLK GPIO1
|
|
//! MISOI/IO0 GPIO2
|
|
//! MOSI/IO1 GPIO3
|
|
//! IO2 GPIO4
|
|
//! IO3 GPIO5
|
|
//! CS GPIO11
|
|
//!
|
|
//! Depending on your target and the board you are using you have to change the
|
|
//! pins.
|
|
//!
|
|
//! Connect a flash chip (GD25Q64C was used) and make sure QE in the status
|
|
//! register is set.
|
|
|
|
#![no_std]
|
|
#![no_main]
|
|
|
|
use esp32h2_hal::{
|
|
clock::ClockControl,
|
|
gpio::IO,
|
|
peripherals::Peripherals,
|
|
prelude::*,
|
|
spi::{Address, Command, HalfDuplexReadWrite, Spi, SpiDataMode, SpiMode},
|
|
Delay,
|
|
};
|
|
use esp_backtrace as _;
|
|
use esp_println::println;
|
|
|
|
#[entry]
|
|
fn main() -> ! {
|
|
let peripherals = Peripherals::take();
|
|
let system = peripherals.SYSTEM.split();
|
|
let clocks = ClockControl::boot_defaults(system.clock_control).freeze();
|
|
|
|
let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
|
|
let sclk = io.pins.gpio1;
|
|
let miso = io.pins.gpio2;
|
|
let mosi = io.pins.gpio3;
|
|
let sio2 = io.pins.gpio4;
|
|
let sio3 = io.pins.gpio5;
|
|
let cs = io.pins.gpio11;
|
|
|
|
let mut spi = Spi::new_half_duplex(
|
|
peripherals.SPI2,
|
|
Some(sclk),
|
|
Some(mosi),
|
|
Some(miso),
|
|
Some(sio2),
|
|
Some(sio3),
|
|
Some(cs),
|
|
100u32.kHz(),
|
|
SpiMode::Mode0,
|
|
&clocks,
|
|
);
|
|
|
|
let mut delay = Delay::new(&clocks);
|
|
|
|
loop {
|
|
// READ MANUFACTURER ID FROM FLASH CHIP
|
|
let mut data = [0u8; 2];
|
|
spi.read(
|
|
SpiDataMode::Single,
|
|
Command::Command8(0x90, SpiDataMode::Single),
|
|
Address::Address24(0x000000, SpiDataMode::Single),
|
|
0,
|
|
&mut data,
|
|
)
|
|
.unwrap();
|
|
println!("Single {:x?}", data);
|
|
delay.delay_ms(250u32);
|
|
|
|
// READ MANUFACTURER ID FROM FLASH CHIP
|
|
let mut data = [0u8; 2];
|
|
spi.read(
|
|
SpiDataMode::Dual,
|
|
Command::Command8(0x92, SpiDataMode::Single),
|
|
Address::Address32(0x000000_00, SpiDataMode::Dual),
|
|
0,
|
|
&mut data,
|
|
)
|
|
.unwrap();
|
|
println!("Dual {:x?}", data);
|
|
delay.delay_ms(250u32);
|
|
|
|
// READ MANUFACTURER ID FROM FLASH CHIP
|
|
let mut data = [0u8; 2];
|
|
spi.read(
|
|
SpiDataMode::Quad,
|
|
Command::Command8(0x94, SpiDataMode::Single),
|
|
Address::Address32(0x000000_00, SpiDataMode::Quad),
|
|
4,
|
|
&mut data,
|
|
)
|
|
.unwrap();
|
|
println!("Quad {:x?}", data);
|
|
delay.delay_ms(1500u32);
|
|
}
|
|
}
|