0064766ef2
* No longer publicly expose the `PeripheralClockControl` struct * Update examples as needed to get things building again * Update CHANGELOG.md * Address review feedback, fix a warning * Use a critical section for all devices other than the ESP32-C6/H2, as they modify multiple registers * Rebase and update `etm` driver to fix build errors
116 lines
2.9 KiB
Rust
116 lines
2.9 KiB
Rust
//! This shows using Parallel IO to input 4 bit parallel data at 1MHz clock
|
|
//! rate.
|
|
//!
|
|
//! Uses GPIO 1, 2, 3 and 4 as the data pins.
|
|
|
|
#![no_std]
|
|
#![no_main]
|
|
#![feature(type_alias_impl_trait)]
|
|
|
|
use embassy_executor::Executor;
|
|
use embassy_time::{Duration, Timer};
|
|
use esp32c6_hal::{
|
|
clock::ClockControl,
|
|
dma::DmaPriority,
|
|
embassy,
|
|
gdma::{self, Gdma},
|
|
gpio::{GpioPin, Unknown, IO},
|
|
interrupt,
|
|
parl_io::{BitPackOrder, NoClkPin, ParlIoRx, ParlIoRxOnly, RxFourBits},
|
|
peripherals,
|
|
peripherals::Peripherals,
|
|
prelude::*,
|
|
};
|
|
use esp_backtrace as _;
|
|
use esp_println::println;
|
|
use static_cell::make_static;
|
|
|
|
#[embassy_executor::task]
|
|
async fn parl_io_task(
|
|
mut parl_io_rx: ParlIoRx<
|
|
'static,
|
|
gdma::Channel0,
|
|
RxFourBits<
|
|
'static,
|
|
GpioPin<Unknown, 1>,
|
|
GpioPin<Unknown, 2>,
|
|
GpioPin<Unknown, 3>,
|
|
GpioPin<Unknown, 4>,
|
|
>,
|
|
NoClkPin,
|
|
>,
|
|
) {
|
|
let buffer = dma_buffer();
|
|
loop {
|
|
parl_io_rx.read_dma_async(buffer).await.unwrap();
|
|
println!("Received: {:02x?} ...", &buffer[..30]);
|
|
|
|
Timer::after(Duration::from_millis(500)).await;
|
|
}
|
|
}
|
|
|
|
#[entry]
|
|
fn main() -> ! {
|
|
esp_println::println!("Init!");
|
|
let peripherals = Peripherals::take();
|
|
let mut system = peripherals.PCR.split();
|
|
let clocks = ClockControl::boot_defaults(system.clock_control).freeze();
|
|
|
|
#[cfg(feature = "embassy-time-systick")]
|
|
embassy::init(
|
|
&clocks,
|
|
esp32c6_hal::systimer::SystemTimer::new(peripherals.SYSTIMER),
|
|
);
|
|
|
|
#[cfg(feature = "embassy-time-timg0")]
|
|
{
|
|
let timer_group0 = esp32c6_hal::timer::TimerGroup::new(peripherals.TIMG0, &clocks);
|
|
embassy::init(&clocks, timer_group0.timer0);
|
|
}
|
|
|
|
let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
|
|
|
|
let tx_descriptors = make_static!([0u32; 8 * 3]);
|
|
let rx_descriptors = make_static!([0u32; 8 * 3]);
|
|
|
|
let dma = Gdma::new(peripherals.DMA);
|
|
let dma_channel = dma.channel0;
|
|
|
|
let rx_pins = RxFourBits::new(io.pins.gpio1, io.pins.gpio2, io.pins.gpio3, io.pins.gpio4);
|
|
|
|
let parl_io = ParlIoRxOnly::new(
|
|
peripherals.PARL_IO,
|
|
dma_channel.configure(
|
|
false,
|
|
tx_descriptors,
|
|
rx_descriptors,
|
|
DmaPriority::Priority0,
|
|
),
|
|
1u32.MHz(),
|
|
&clocks,
|
|
)
|
|
.unwrap();
|
|
|
|
let parl_io_rx = parl_io
|
|
.rx
|
|
.with_config(rx_pins, NoClkPin, BitPackOrder::Msb, Some(0xfff))
|
|
.unwrap();
|
|
|
|
// you need to manually enable the DMA channel's interrupt!
|
|
interrupt::enable(
|
|
peripherals::Interrupt::DMA_IN_CH0,
|
|
interrupt::Priority::Priority1,
|
|
)
|
|
.unwrap();
|
|
|
|
let executor = make_static!(Executor::new());
|
|
executor.run(|spawner| {
|
|
spawner.spawn(parl_io_task(parl_io_rx)).ok();
|
|
});
|
|
}
|
|
|
|
fn dma_buffer() -> &'static mut [u8; 4092 * 4] {
|
|
static mut BUFFER: [u8; 4092 * 4] = [0u8; 4092 * 4];
|
|
unsafe { &mut BUFFER }
|
|
}
|