//! Uses `LP_UART` and logs "Hello World from LP Core".
//! Uses GPIO4 for RX and GPIO5 for TX. GPIOs can't be changed.
//! It is neccessary to use Serial-Uart bridge connected to TX and RX to see
//! logs from LP_UART. Make sure the LP RAM is cleared before loading the code.

#![no_std]
#![no_main]

use core::fmt::Write;

use esp32c6_lp_hal::{delay::Delay, prelude::*, uart::LpUart};
use panic_halt as _;

#[entry]
fn main(mut uart: LpUart) -> ! {
    let _peripherals = esp32c6_lp::Peripherals::take().unwrap();

    let mut delay = Delay::new();
    loop {
        writeln!(uart, "Hello World from LP Core").unwrap();
        delay.delay_ms(1500);
    }
}