* Fix Async UART
The uart handler was `writing` to the enable register instead of
`modify`, which meant any wake would see the cleared enabled bit and
think the event had occurred. This wasn't seen before the split of uart
because it was only possible to listen to one thing at a time.
This PR also removes the ReadBufferFull error in favour of returning the
max bytes in the buffer.
The serial examples has been updated to actually have some cross task
communication.
* changelog
* fix dev deps
* No longer publicly expose the `PeripheralClockControl` struct
* Update examples as needed to get things building again
* Update CHANGELOG.md
* Address review feedback, fix a warning
* Use a critical section for all devices other than the ESP32-C6/H2, as they modify multiple registers
* Rebase and update `etm` driver to fix build errors
* Ensure that uart is configured to account for clock changes, not just boot defaults
* fix examples
* changelog
---------
Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com>
* Add support for splitting esp32 uart into TX and RX
* Keeps existing API for uart, but wraps it in Tx and Rx sub-types
* Adds split() method similar to embassy-rs nRF/stm32/rp for getting indepdendent TX and RX
parts
* Implements e-h traits for TX and RX types
* Add esp32s3 example
* finish implementing
* rebase examples
* declare new examples
* fix fmt
* rebase on 0.12.0
* fix fmt
* fix fmt
* merge embassy_serial_split example with embassy_serial
* fix changelog
* fix changelog
* Update a bunch of dependencies
* Implement `embedded-io` and `embedded-io-async` traits for USB Serial JTAG
* Implement `embedded-io` and `embedded-io-async` traits for UART
* Fix `embassy_serial` examples
* Update CHANGELOG
* Address review comments
* Begin working on `PeripheralClockControl` for the ESP32-H2
* Update `UART` driver to add H2 support
* Update `TIMG` driver to add H2 support
* Update the hello_world example to use `TIMG` and `UART`
* Initial async_{write|flush} implementations
- ESP32C3 + UART0 example
* Support UART1 & UART2
* Add examples for all chips
* reduce number of wakers depending on uart count
* Create an `soc` module with a submodule for each chip, move `peripherals` in
* Move the `cpu_control` module into `soc`
* Move the `efuse` module into `soc`
* Refactor type definitions from `gpio` module into `soc`
* Put all embassy-related files in a common directory
* Change visibility of `GpioPin` constructor
* Create the `esp32c6-hal` package
* Teach `esp-hal-common` about the ESP32-C6
* Get a number of peripheral drivers building for the ESP32-C6
bckup
initial clocks_ii
* Create the `esp32c6-hal` package
C6: update
* Simplify and fix the linker script
update
* C6: add I2S
* Create the `esp32c6-hal` package
* Teach `esp-hal-common` about the ESP32-C6
* Get a number of peripheral drivers building for the ESP32-C6
bckup
initial clocks_ii
* Create the `esp32c6-hal` package
* C6: update
* Simplify and fix the linker script
* update
* C6: add I2S
* update
* C6 Interrupts
* C6: Update build.rs, linker scripts and initial examples
* C6: RMT
* Fix interrupt handling
* Fix `ClockControl::configure`
* C6: revert to I2S0 instead of just I2S
* C6: rebase and update
* RTC not buildable
* Implement RWDT and SWD disable
* C6: working LEDC
* C6: working RMT
* C6: add aes
* C6: add mcpwm
* C6: add rtc_cntln - not finished
* C6: update and formatting
* C6: add pcnt
* C6: add examples and format
* Remove inline assembly, fix interrupts and linker scripts
* Remove unused features, update cargo config for atomic emu, misc cleanup
* Get ADC building and example "working" (as much as it ever does)
* Remove a bunch of unused constants which were copied from ESP-IDF
* The `mcpwm` example now works correctly
* Get `TWAI` peripheral driver building for C6
* Clean up the `rtc_cntl` module and get all the other HALs building again
* Add the C6 to our CI workflow
* Fix various things that have been missed when rebasing
Still missing a few examples (`clock_monitor`, `embassy_spi`, `ram`)
* C6: Small updates in wdt (#1)
* C6: Update WDT
* C6: Update examples with WDT update
* Update `esp-println` dependency to fix build errors
* Fix formatting issues causing pre-commit hook to fail
* Get some more examples working
* Working `ram` example
* Sync with changes in `main` after rebasing
* Working `embassy_spi` example
* Use a git dependency for the PAC until we publish a release
* Fix I2S for ESP32-C6
* Fix esp32c6 direct boot (#4)
* Add direct boot support for C6
* Fix direct boot for c6
- Actually copy into rtc ram
- remove dummy section that is no longer needed (was just a waste of
flash space)
- Move RTC stuff before the no load sections
* Update RWDT and refactor RTC (#3)
* C6: Update RWDT and add example, refactor RTC and add not-really-good example
* Update based on review comments, resolve bunch of warnings and run cargo fmt
* Update C6 esp-pacs rev commit
* Fix clocks_ll/esp32c6.rs
* Fix riscv interrupts
* Remove clock_monitor example for now
* RAM example works in direct-boot mode
* Add a TODO for &mut TIMG0 and cargo fmt
* Fix linker script after a bad rebase
* Update CI and Cargo.toml embassy required features
* use riscv32imac-unknown-none-elf target for C6 in CI
* change default target to riscv32imac-unknown-none-elf
* add riscv32imac-unknown-none-elf target to MSRV job
* another cleanup
---------
Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de>
Co-authored-by: Jesse Braham <jesse@beta7.io>
* Make required changes to include new `RADIO` peripheral
* Use published versions of PAC and `esp-println`
* Use the correct target extensions (`imac`)
* Fix the super watchdog timer, plus a few more examples
* Fix UART clock configuration
* Make sure to sync UART registers when configuring AT cmd detection
* Disable APM in direct-boot mode
* Address a number of review comments
* Fix `SPI` clocks and `rtc_watchdog` example (#6)
* fix SPI clocks
* run cargo fmt
* Add comment about used default clk src
* Fix rtc_watchdog example in BL mode
* run cargo fmt
* Update rtc_watchdog example that it works in DB mode
* README and example fixes/cleanup
* Add I2C peripheral enable and reset
* Fix `ApbSarAdc` configuration in `system.rs`
---------
Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de>
Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com>
Co-authored-by: Juraj Sadel <jurajsadel@gmail.com>
Co-authored-by: Scott Mabin <scott@mabez.dev>
* Peripheral ref/sha (#312)
* Add SHA to list of peripherals to be created
* Refactor SHA peripheral to use PeripheralRef
* Update SHA examples to get them building again
* Fix async time drivers
* Fix usb otg
* Fix s3
Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com>
* Add the peripheral module plus some helper macros in preparation
* peripheral macro
* Add peripheral generation macro
* Fixes after rebase
* Update the signature of Peripherals::take
* syncronise hello world example
* fmt the entire repo
Co-authored-by: Jesse Braham <jesse@beta7.io>
