* Update a bunch of dependencies
* Implement `embedded-io` and `embedded-io-async` traits for USB Serial JTAG
* Implement `embedded-io` and `embedded-io-async` traits for UART
* Fix `embassy_serial` examples
* Update CHANGELOG
* Address review comments
* Use all remaining memory for stack(s)
* Remove HEAP related code from RISCV linker scripts
* Fix direct-boot / mcu-boot linker scripts
* Use a statically allocated stack for core-1
* Remove the old `pulse_control` driver
* Update `esp-hal-smartled` to use the new `rmt` driver instead
* Update the `hello_rgb` example for each chip
* Update CHANGELOG
* Introduce a trait for DMA channels
This trait is then used to hold types related to the particular DMA channel. This change allows us to simplify user-facing types.
* Remove private type from I2s
* Remove redundant spi3 example, update examples
* Merge markdown sections
* Add changelog entry
* Add ROM MD5 definitions in linker and devices
* Add initial MD5 support
* Implement traits and add comments to MD5 module
* Add MD5 example to ESP32-C3
* Test MD5 context on the quick brown fox
* Implemenr From<Context> for Digest
* Add MD5 to the rest of the examples
* Add docs for MD5
* Remove #[repr(transparent)] from md5::Digest
* Update CHANGELOG.md
* Create issue_handler.yml
* No longer re-export `embedded-hal`, hide exported macros in documentation
* Add simple package-level documentation for each HAL package
* Clean up/simplify re-exports
* Fix the examples that I broke
* Ensure top-level modules/types/functions have doc comments
* Update CHANGELOG
* Re-export the `soc::psram` module where available
---------
Co-authored-by: Sergio Gasquez Arcos <sergio.gasquez@gmail.com>
For now, only the -c3.
---
Open up LEDC fade support to all chips.
The C6 chip needs some special handling because its fade registers also
handle gamma, and the ESP chip needs some special handling because it
has two banks of channels. The code to handle these is already present
in channel.rs, but needs to be copied and adapted. Do that, and drop
all the esp32c3 feature checks.
---
Add a function to poll the duty-fade state
Use the unmasked interrupt bit in the LEDC register block, since that
will get updated by the hardware whether or not we've connected anything
to the interrupt source. Also be sure to clear that bit before starting
a new fade, so it's always clear while fading.
This will allow dumb (non-async-code) polling of the fade state after
one is started by the start_duty_fade API.
---
Fix non-C3 devices to use the right int_raw bits
These are inconsistently named between the esp32 variants.
---
Add examples of hardware duty-cycle fading
Just a relatively simple zero to 100 and back to zero, over a total of 2
seconds, to get a breathing effect.
This does make the main loop{} have a 2-second period instead of the
current nearly-zero period, but nothing else is happening so that's
fine.
---
Fix two bugs in hardware fading
When figuring out how many duty-cycle changes need to happen per counter
overflow, we need to use the absolute value of the difference between
the start and end duty values, not the raw difference. When fading from
(e.g.) 100% to 0, this will overflow, and both the debug-mode panic and
the release-mode wrapping behavior give the wrong delta value.
So calculate an absolute value difference first, and use that.
Then, when running through the while loop that allocates bits between
pwm_cycles and duty_cycle, the check on pwm_cycles was wrong -- since
the value reduces each time through the loop, we need to keep looping as
long as it's *above* some threshold, not below.
---
Simplify and refactor duty-cycle fade code
I'm not sure if this will fix the extremely-short fade times that we're
seeing with the older code, but we'll see.
Move all the calculations out of the ChannelHW implementations, and make
those *just* set registers. The calculations are the same for all chip
variants, so don't need to be duplicated for each chip feature, like the
register macros are.
Change the calculations from a loop doing bit shifts, to an explicit
division and a couple of range checks. This way we can get a lot closer
to the requested percentages and durations.
Use the u32::abs_diff function instead of open-coding it (now that I see
it exists).
Use u16::try_from() to limit the range of values, and use try_into<u16>
and map_err and the ? operator to more clearly handle numbers out of
range.
Drop the Result<> return type from the ChannelHW function, as it can't
fail anymore.
Fix the duty_range value -- before, when duty_exp was (say) 8,
duty_range would be 256, and if one of the *_duty_pct values was 100,
the start or end duty value would be too big. The range of start and
end duty values is 0..255, so we have to subtract one to handle 100%.
Finally, add a comment on the is_duty_fade_running{,_hw} methods.
---
Some fades can't work; return errors for them.
Add a new Error enum value with a sub-error enum with more details.
Return it from the error cases in the fade method.
If the calculated cycles_per_step is more than 10 bits, fail as well;
the field in the register is only 10 bits wide.
Fix all the examples to run a 1-second fade instead of a 2-second, since
the 2-second fade will run into this error. (Assert that, as well.)
---
When fading on a -c6 chip, set two more registers
The gamma functionality of -c6 chips needs two more fields set. One
tells the chip how many gamma stages it should iterate through, but we
only implement linear fading, so always use 1. The other tells the chip
to latch the value of the other gamma registers into the chosen slot, so
even though its value never changes, the write needs to happen.
---
Add changelog entry
* Small refactor to extract functions for setting up reads/writes
* Implement async capabilities for `I2C` driver
* Add async I2C examples for each supported chip
* Update CHANGELOG
* implement fetching the rtc timer value in miliseconds and mircroseconds
* fmt cleanup
* add rtc_time examples
* get_time_raw/esp32: delay 1us between time update checks like esp-idf
* cargo fmt
* Initial async_{write|flush} implementations
- ESP32C3 + UART0 example
* Support UART1 & UART2
* Add examples for all chips
* reduce number of wakers depending on uart count
* Extract the `esp-hal-smartled` package
This (finally) eliminates the `esp_hal_common::utils` module!
* Remove all references to the old `smartled` feature from CI
* Move some linker scripts into `esp-hal-common` and update the build script
* Move `EspDefaultHandler` and `DefaultHandler` definitions into `esp-hal-common`
* Re-export everything from `esp-hal-common`
* Add a couple cfg symbols, cleanup/organize some exports/modules
* Create an `soc` module with a submodule for each chip, move `peripherals` in
* Move the `cpu_control` module into `soc`
* Move the `efuse` module into `soc`
* Refactor type definitions from `gpio` module into `soc`
* Put all embassy-related files in a common directory
* Change visibility of `GpioPin` constructor
* ground work for async dma (gdma only atm)
* Add async DMA (GDMA) - esp32c3/esp32c2
* Add Async SPI impl for esp32c3/c2
* Remove private modules from DMA
* add async spi example for esp32c3
* Switch to assoc wakers instead of a static array
* add support for esp32/esp32s2
* add support for esp32s3
* run fmt
* add c2 example, fix CI
* Remove redundant comments
* Add `is_listening` to `Pin` trait
* Add `Wait` impl for Gpio Input
* Add GPIO wait example for C3
* Ensure correct bank is accessed in interrupt
* Add esp32c2 wait example
* Add esp32s3 wait example
* Add esp32s2 wait example
* Add esp32 wait example
* Run fmt
* Add example to cargo tomls
* Add top level docs for embassy examples
* Mention the higher MSRV for async in the README
---------
Co-authored-by: Jesse Braham <jesse@beta7.io>
* start of pulse counter implementation
* implement interrupts
implement pcnt for esp32, esp32s2, and esp32s3
* implement pcnt for esp32s2
* fix esp32 PCNT signal names
* update PCNT register/fields for cleaned up PAC
* implement events/get_events (choosing what events interrupt)
* added pcnt example: simple encoder configuration
* restrict pcnt::channel::Channel::new() to super
* PcntPin -> PcntSignal
added range checks for thresholds and limits
* PcntSource is a better name I think
* handle error for PCNT Unit configure() in example
* update pac versions for status register change
* cargo fmt
* cargo fmt (examples)
* PcntSource now only stores the source id.
add a critical section to protect the ctrl & isr_en registers
* cargo fmt
* Add the peripheral module plus some helper macros in preparation
* peripheral macro
* Add peripheral generation macro
* Fixes after rebase
* Update the signature of Peripherals::take
* syncronise hello world example
* fmt the entire repo
Co-authored-by: Jesse Braham <jesse@beta7.io>
- Rename timg feature to timg0 to better refect which TG is being used
- Use the time_driver::TimerType in the signature of init to fix#268
- Update examples
- Fix CI features
- Add timg0 cfg to build.rs
* Add untested basic SHA for esp-sX/cX chips
* Fix ptr type inconsistency for S2
* Add ESP32 impl & fix process_buffer latch issue
* Add debug example for SHA accelerator
* Clean up no-op buffer prints
* Test vector parity (on esp32s3)
* Checkpoint for converting to alignment helper
* Finish refactoring & additional parity tests on esp32s3
* Remove core_intrinsics requirement for now
* Fix case where (src.len() % 4) == 3
* Finish sha2 example with performance comparison (12-61x speedup)
* Refactor ESP32 to alignment helper & Clean up example
* Prevent out-of-bounds reads in ESP32 version
* Revert Cargo debug changes
* Remove cargo config.toml
* Clean up example
* Remove common/rust-toolchain & ignore in future
* Might as well use actual size_of const
* Remove SHA512/SHA384 for C2/C3
* Directly import nb::block! to remove unused import warning & fix c2 feature detect
* Remove stray newlines
* Fix esp32c2 having SHA256
* ESP32 also has SHA384
* Remove comments that don't have a purpose
* Clean up example & finish() handling
* Add examples & add ESP32 free()
* Update C2/C3 examples to show accurate algorithm used
* Fix busy check for ESP32
* Remove outdated TODO comment
* Update PAC for ESP3 and (actually) fix busy check
* Refactor ESP32 version to reduce search space
* Add debug printlns to sha example & clean up comments
* Fix ESP32 version, finally
Co-authored-by: ferris <ferris@devdroplets.com>
Co-authored-by: Jesse Braham <jesse@beta7.io>
* wip: timg embassy driver
- read_raw on timg renamed to now()
- timg initialized and stored in static for use in the embassy driver
- timg sets alarm value
- untested whether alarms actually trigger
* TIMG timer driver for esp32, esp32s3
- Adds the timg timer block as a time driver for embassy
- Not enabled on the C3 as it only has one timer block, better to use
systimer
- s2 example added but can't build due to atomic requirements in
futures-core
* Add S2 atomic support with emulation, fixup embassy support for the S2
* Move executor & static-cell to dev deps. Make eha optional
* Add c2 support, run fmt
* Update to crates.io embassy releases
* Update eha
* update timg time driver to new trait
* Remove exception feature of esp-backtrace and use the user handler for backtracing
* Add async testing workflow
* Update systick example
* Fix S2 examples
* Update xtensa-toolchain
* set rustflags for s2 target
* Disable systick for esp32s2 until we can fix the noted issues
* review improvements
- Fix intr prio array being off by one
- emabssy time prio interrupt set to max prio
- use cfg instead of feature for systick detection
* Update example time delays
* WIP: common/spi: Implement `SpiDevice`
to get shared access to an SPI bus directly via the HAL.
* WIP: common/spi: add SpiBusDevice::new
to create instances via a function call.
* esp32/examples: Add example for spi device trait
* common/spi: Finish "SpiDevice" implementation
for esp32. Abandons the approach of having the user pass in some generic
mutex in favor of creating the Mutex as part of the API so it isn't
exposed to the user in the first place.
* common/spi: Add more thorough docs
* esp32/examples: Fix example for eh1 "SpiDevice"
* common/spi: Implement `SpiDevice` for xtensa arch
and move the code into a submodule that is fenced with conditional
compilation directives.
* esp32/examples: Update spi device example
to the changed APIs for the timers and clocks, and add more transmission
tests to the example code.
* common/spi: Create devices from buscontroller
directly, instead of offering only the `new` method.
* common/spi: Finish `SpiBusDevice` trait
from embedded-hal 1.0.0-alpha.8.
* esp32: Update `SpiBusDevice` usage example.
* common/spi: Fix mutex types for xtensa32 esp
because the esp32/esp32s3 can use `SpinLockMutex`, whereas the esp32s2
has access only to `CriticalSectionMutex`.
* common/spi: Implement `SpiBusDevice` for riscv
based esp32c3.
* general: Add examples for spi device loopback
to all esp variants.
* common: Use esp_backtrace in spi_eh1_device examples
* common/spi: Update module documentation.
* common/spi: Use `critical_section::Mutex`
to unify locking across all esp variants.
* esp32c3-hal: Fix spi device example
* esp32c3/examples: Fix typo in used spi pins
Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com>
Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com>
* CS impl
* use CS Mutex in C3 examples
* use CS Mutex in S2 examples
* Update esp32 example
* run fmt
* Update S3 examples
* Remove uses of unsafe where no longer required
* use esp_backtrace in examples
* fix import & fmt once more
* Bump MSRV to 1.60.0
Co-authored-by: Jesse Braham <jesse@beta7.io>
* common/spi: Turn fifo size into const
instead of hard-coding it into the code in various places.
* common/spi: Alias `write_bytes` to `send_bytes`
since they share the same interface and the same code anyway.
* common/spi: Implement `read_bytes`
as counterpart to `send_bytes` that is responsible only for reading
bytes received via SPI.
* common/spi: Rewrite `transfer`
to use `send_bytes` and `read_bytes` under the hood and remove duplicate
code.
* common/spi: Create submodule for embedded_hal_1
that is re-exported when the `eh1` feature flag is active. This removes
lots of duplicate `#[cfg(...)]` macros previously part of the code.
* common/spi: Implement `SpiBus` and `SpiBusWrite`
traits from the `embedded-hal 1.0.0-alpha.8`.
* common/spi: Make `mosi` pin optional
* esp32-hal: Add new SPI example with `eh1` traits
* esp32-hal/examples/spi_eh1: Add huge transfer
and bump the SPI speed to 1 MHz.
* common/spi: Apply rustfmt
* common/spi: Use `memcpy` to read from registers
This cuts down the time between consecutive transfers from about 2 ms
to less than 1 ms.
* WIP: common/spi: Use `ptr::copy` to fill write FIFO
cutting down the time between transfers from just below 1 ms to ~370 us.
The implementation is currently broken in that it will always fill the
entire FIFO from the input it is given, even if that isn't FIFO-sized...
* common/spi: Add more documentation
* esp32/examples/spi_eh1: Fix `transfer_in_place`
* esp32/examples/spi_eh1: Add conditional compile
and compile a dummy instead when the "eh1" feature isn't present.
* esp32-hal: Ignore spi_eh1 example
in normal builds, where the feature flag "eh1" isn't given. Building the
example directly via `cargo build --example spi_eh1_loopback` will now
print an error that this requires a feature flag to be active.
* common/spi: Use `write_bytes`
and drop `send_bytes` instead. Previoulsy, both served the same purpose,
but `send_bytes` was introduced more recently and is hence less likely
to cause breaking changes in existing code.
* common/spi: Fix mosi pin setup
* Add SPI examples with ehal 1.0.0-alpha8 traits
to all targets.
* common/spi: Fix `read` behavior
The previous `read` implementation would only read the contents of the
SPI receive FIFO and return that as data. However, the `SpiBusRead`
trait defines that while reading, bytes should be written out to the bus
(Because SPI is transactional, without writing nothing can be read).
Reimplements the `embedded-hal` traits to correctly implement this
behavior.
* common/spi: Use full FIFO size on all variants
All esp variants except for the esp32s2 have a 64 byte FIFO, whereas the
esp32s2 has a 72 byte FIFO.
* common/spi: Use common pad byte for empty writes
* common/spi: Fix reading bytes from FIFO
by reverting to the old method of reading 32 bytes at a time and
assembling the return buffer from that. It turns out that the previous
`core::slice::from_raw_parts()` doesn't work for the esp32s2 and esp32s3
variants, returning bogus data even though the correct data is present
in the registers.
* common/spi: Fix typos
* examples: Fix spi_eh1_loopback examples
* esp32: Fix typo in Frequency word in some identifiers
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
* esp32c3: Add support for PLL clock configuration
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
* clock: Move definition of Clock types to common level
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
* esp32c3: Add support for RTC Clock configuration
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
* esp32c3: Add example for the RTC Watchdog Timer driver
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
