* Force frame pointers for RISC-V chips
* Various dependency updates
* Update to latest published PACs and resolve build errors
* Top-level `README` updates
* Further clarify when `RUSCT_BOOTSTRAP=1` is required
* No longer publicly expose the `PeripheralClockControl` struct
* Update examples as needed to get things building again
* Update CHANGELOG.md
* Address review feedback, fix a warning
* Use a critical section for all devices other than the ESP32-C6/H2, as they modify multiple registers
* Rebase and update `etm` driver to fix build errors
* Executor related touchups
* Make log optional
* Add defmt feature and derive on Debug structs
* Test both log drivers
* Update esp-println
* Document defmt msrv
* Create an `soc` module with a submodule for each chip, move `peripherals` in
* Move the `cpu_control` module into `soc`
* Move the `efuse` module into `soc`
* Refactor type definitions from `gpio` module into `soc`
* Put all embassy-related files in a common directory
* Change visibility of `GpioPin` constructor
* Create the `esp32c6-hal` package
* Teach `esp-hal-common` about the ESP32-C6
* Get a number of peripheral drivers building for the ESP32-C6
bckup
initial clocks_ii
* Create the `esp32c6-hal` package
C6: update
* Simplify and fix the linker script
update
* C6: add I2S
* Create the `esp32c6-hal` package
* Teach `esp-hal-common` about the ESP32-C6
* Get a number of peripheral drivers building for the ESP32-C6
bckup
initial clocks_ii
* Create the `esp32c6-hal` package
* C6: update
* Simplify and fix the linker script
* update
* C6: add I2S
* update
* C6 Interrupts
* C6: Update build.rs, linker scripts and initial examples
* C6: RMT
* Fix interrupt handling
* Fix `ClockControl::configure`
* C6: revert to I2S0 instead of just I2S
* C6: rebase and update
* RTC not buildable
* Implement RWDT and SWD disable
* C6: working LEDC
* C6: working RMT
* C6: add aes
* C6: add mcpwm
* C6: add rtc_cntln - not finished
* C6: update and formatting
* C6: add pcnt
* C6: add examples and format
* Remove inline assembly, fix interrupts and linker scripts
* Remove unused features, update cargo config for atomic emu, misc cleanup
* Get ADC building and example "working" (as much as it ever does)
* Remove a bunch of unused constants which were copied from ESP-IDF
* The `mcpwm` example now works correctly
* Get `TWAI` peripheral driver building for C6
* Clean up the `rtc_cntl` module and get all the other HALs building again
* Add the C6 to our CI workflow
* Fix various things that have been missed when rebasing
Still missing a few examples (`clock_monitor`, `embassy_spi`, `ram`)
* C6: Small updates in wdt (#1)
* C6: Update WDT
* C6: Update examples with WDT update
* Update `esp-println` dependency to fix build errors
* Fix formatting issues causing pre-commit hook to fail
* Get some more examples working
* Working `ram` example
* Sync with changes in `main` after rebasing
* Working `embassy_spi` example
* Use a git dependency for the PAC until we publish a release
* Fix I2S for ESP32-C6
* Fix esp32c6 direct boot (#4)
* Add direct boot support for C6
* Fix direct boot for c6
- Actually copy into rtc ram
- remove dummy section that is no longer needed (was just a waste of
flash space)
- Move RTC stuff before the no load sections
* Update RWDT and refactor RTC (#3)
* C6: Update RWDT and add example, refactor RTC and add not-really-good example
* Update based on review comments, resolve bunch of warnings and run cargo fmt
* Update C6 esp-pacs rev commit
* Fix clocks_ll/esp32c6.rs
* Fix riscv interrupts
* Remove clock_monitor example for now
* RAM example works in direct-boot mode
* Add a TODO for &mut TIMG0 and cargo fmt
* Fix linker script after a bad rebase
* Update CI and Cargo.toml embassy required features
* use riscv32imac-unknown-none-elf target for C6 in CI
* change default target to riscv32imac-unknown-none-elf
* add riscv32imac-unknown-none-elf target to MSRV job
* another cleanup
---------
Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de>
Co-authored-by: Jesse Braham <jesse@beta7.io>
* Make required changes to include new `RADIO` peripheral
* Use published versions of PAC and `esp-println`
* Use the correct target extensions (`imac`)
* Fix the super watchdog timer, plus a few more examples
* Fix UART clock configuration
* Make sure to sync UART registers when configuring AT cmd detection
* Disable APM in direct-boot mode
* Address a number of review comments
* Fix `SPI` clocks and `rtc_watchdog` example (#6)
* fix SPI clocks
* run cargo fmt
* Add comment about used default clk src
* Fix rtc_watchdog example in BL mode
* run cargo fmt
* Update rtc_watchdog example that it works in DB mode
* README and example fixes/cleanup
* Add I2C peripheral enable and reset
* Fix `ApbSarAdc` configuration in `system.rs`
---------
Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de>
Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com>
Co-authored-by: Juraj Sadel <jurajsadel@gmail.com>
Co-authored-by: Scott Mabin <scott@mabez.dev>
* wip: initial implementation of transmission only.
* Moved TWAI to its own directory and added initial reception of packets.
* Added extended id transmit and receive.
* Added maybe better code for making packet filters.
* Fixed bug with ids and improved methods of copying data to the peripheral.
* Added some guards against Bus Off
* Added reception of remote frames.
* Clean up of comments, etc
* Updated TWAI naming and cleaned up example a bit.
* Updated bitselector to include better unpacking methods.
* Add embedded-can and limit initial TWAI implementation to esp32c3.
* Added embedded-can to esp32c3 twai example.
* Switched twai filter to using bytestrings.
Co-authored-by: dimi <dimi.polonski@gmail.com>
* Implemented new() for twai filters.
* Clean up TWAI docs and example.
* Fix filter constructors and add examples.
* pre driver PeripheralRef update.
* PeripheralRef/twai
* Format comments with nightly rustfmt.
* Add gpio PeripheralRef and use volatile for direct register access.
Co-authored-by: dimi <dimi.polonski@gmail.com>
