* H2: Add initial i2s support and i2s_read and i2s_sound examples
* Add I2S_SCLK and I2S_DEFAULT_CLK_SRC constants for all chips
* Update I2S driver
* fmt
* Add changelog
* Change DIN GPIO17 to GPIO14 in ESP32 i2s_read example
* H2: Use PLL_48M_CLK in Timg driver and add imer_interrupt example
* Clean timer driver, add helper configure_src_clk and configure_wdt_src_clk methods
* H2: Add imer_interrupt example
* add helper methods for selecting default clk src
* Change PR number in the Changelog
* Add efuse field tables from IDF
* Add efuse fields constants generator
* Fix MAC field in efuse tables
* Add common efuse field impl
* Add efuse fields support for chips
* Add efuse changes to changelog
* Update the `GDMA` driver to support the ESP32-H2
* Update the `SPI` driver to support the ESP32-H2
* Add `SPI` examples for ESP32-H2
* Update CHANGELOG
* Remove copy-pasted references to ESP32-C6
* Update GPIO pins used in SPI examples, add `qspi_flash` example
* Update SPI clock configuration to produce correct clock rate
* Correct comment regarding clock source frequency
Co-authored-by: Sergio Gasquez Arcos <sergio.gasquez@gmail.com>
* H2: Add PLL_48M_CLK src to ClockControl and RawClocks
* H2: Use PLL_48M_CLK as SPI clk src
* H2: cleanup commented block in SPI driver
* H2: update docs comment in embassy_spi example
* fmt
* Add a new line in embassy_spi example
---------
Co-authored-by: Sergio Gasquez Arcos <sergio.gasquez@gmail.com>
Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com>
* Support for multicore async GPIO:
Use the correct registers depending on which core the interrupt is being
serviced on. Fixed a bug in the `esp32::gpio_intr` which would enable
the interrupt on both cores. It now enables the interrupt for the core
in which `listen()` is called.
* add changelog item
* Simplify GPIO interrupt status
* Begin working on `PeripheralClockControl` for the ESP32-H2
* Update `UART` driver to add H2 support
* Update `TIMG` driver to add H2 support
* Update the hello_world example to use `TIMG` and `UART`
* RISCV: Separate PLIC and non-PLIC
* De-duplicate code
* Write 0 to INTR_MAP again to disable peripheral interrupts
* Limit visibility of `get_assigned_cpu_interrupt`
* Create an `soc` module with a submodule for each chip, move `peripherals` in
* Move the `cpu_control` module into `soc`
* Move the `efuse` module into `soc`
* Refactor type definitions from `gpio` module into `soc`
* Put all embassy-related files in a common directory
* Change visibility of `GpioPin` constructor
