* Add the `esp-println` package to the repository
* Update esp-println version in README.md
Co-authored-by: Sergio Gasquez Arcos <sergio.gasquez@gmail.com>
---------
Co-authored-by: Scott Mabin <scott@mabez.dev>
Co-authored-by: Sergio Gasquez Arcos <sergio.gasquez@gmail.com>
* Remove interrupt and thread executor embassy features
* Reserve sw interrupt 3 (4) instead of 0 for multicore systems with the embassy feature enabled
* Remove uneeded #[feature()] from examples
* Fix HIL tests
* Add thread mode context id and fix up examples
* improve embassy module docs
* changelog
* fixup hil tests
* Fixup usb examples
* embassy-usb support
* Add changelog entry
* Update embassy-usb-synopsys-otg
* Change VID/PID to match the blocking example
* Add missing initialisation
* Clean up
* fmt
* Remove log init
* Use released crate
* Revert to released embassy-usb
* Update vid/pid
* Remove redundant TAIT feature gate
* Remove patches and just use git dependency for PACs instead
* Various `README.md` normalization/updates for simpler packages
* Update `README.md` for `esp-hal` and `esp-lp-hal`
* Update repo-level `README.md`
* Remove the `direct-vectoring` feature
* Enables the feature by default
* renames the old direct_vectoring enable function `enable_direct`
* Make enable_direct safe, move it out of vectored module
* enable interrupt preemption by default for riscv
* remove pub from cpu intr handlers
* add enable_direct for Xtensa too
* Fix flip-link feature
* Fix up interrupt docs
* changelog
* fix clippy suggestions
* Disable P4 workflow
* Create an `embedded-hal-02` feature and gate implementations, rename `eh1` to `embedded-hal`
* Use native `Delay` APIs in examples where applicable
* Fix example imports, be explicit about about `embedded-hal-02` feature requirements
* Update `CHANGELOG.md`
* Interrupt runtime binding
* Add `set_interrupt_handler` for GPIO
* Fix
* Fix typo
* Make sure to produce a warning for an unused `#[handler]`
* Simplify GPIO interrupt handling
* Appease Clippy
* Make sure to patch the PACS in esp-hal
* Use latest PAC commit
* CHANGELOG.md entry
* Un-pin the `defmt` package's version for `esp-hal` and `esp-hal-smartled`
* Bump `esp-println` and `esp-backtrace` versions in the `examples` package
* Mention lack of MSRV guarantees when using `defmt` feature
* New package releases
* Fix the `CHANGELOG.md` check in CI
* `defmt` is annoying
* Update documentation index to point to new version, correct release date
* Remove docs.rs badge from and update docs link in `README.md`
* Silence `clippy`
* Fix documentation link in `esp-hal/README.md`
* Remove the chip-specific HAL packages
* Update some doc comments which were missed, fix build script for ESP32/S2
* Refactor/update `esp-hal-procmacros`
* Create the `examples` package, add back all of the previously existing examples
* Use `xtask` automation package for checking examples and documentation in CI
* Combine the `rt-riscv` and `rt-xtensa` features into a single `rt` feature
* Bump MSRV to 1.76.0 (shocking!)
* Re-document the features for the HAL
* No need to re-export the `riscv` package like this
* Make clippy happy, improve CI clippy checks
* Update `CHANGELOG.md`
* riscv: zero bss
Co-authored-by: Björn Quentin <bjoernQ@users.noreply.github.com>
* Address a number of review comments
* Correct pin number in `hello_rgb` example for ESP32-C3
* Address the remaining review comments
* More small tweaks/improvements
* Fix RMT examples (#11)
* Fix RMT examples
* Remove logger-init
* Make I2S examples work on ESP32 (#12)
* Make I2S examples work on ESP32
* Remove logger init
* Fix the direct-vectoring examples on all RISCV chips (#10)
* Update GPIOs for some examples...
* Embassy timer example fixes (#13)
* Switch to generic queue instead of integrated for all examples
* changelog
* Update GPIO in another example, make `rustfmt` happy
* Fix ESP32-S2 PSRAM
* Avoid UART0 and SPI flash pins (#15)
* Avoid UART0 and SPI flash pins
* Fix spi_eh1_device_loopback for non-ESP32
* Update examples/src/bin/gpio_interrupt.rs
Co-authored-by: Juraj Sadel <jurajsadel@gmail.com>
---------
Co-authored-by: Juraj Sadel <jurajsadel@gmail.com>
---------
Co-authored-by: Scott Mabin <scott@mabez.dev>
Co-authored-by: Björn Quentin <bjoernQ@users.noreply.github.com>
Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de>
Co-authored-by: Juraj Sadel <jurajsadel@gmail.com>
